This SteelBond™ Heavy-Duty Welding Glue is a fast setting two-part cold weld system that provides strong, lasting repair to welding metal and multiple other surface types.Perfect Ideal for DIY household, automotive, marine, craft repair, and much more.
SteelBond™ Heavy-Duty Welding Glueis steel-reinforced, has a tensile strength, and can withstand high temperatures. When fully cured, this welding glue is waterproof and resistant to petroleum, chemical, and acid. It can be used as an adhesive, laminate, plug, filler, sealant, and electrical insulator.
HOW TO USE? Stay pliable for 2 minutes after mixing, set in just 1 hour, and cures fully in 8-12 hours.
SIMPLE TO USE:After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours.
EFFECTIVE ADHESIVE AGENT: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil.
HIGH-TEMPERATURE RESISTANT: Can withstand temperatures up to 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness.
DO IT YOURSELF: Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time.
SURFACE APPLICATION:Metal, Plastic & PVC, wood, concrete, ceramic & Tile, and fiberglass. Before use, the glue, clean, and drying the surface and your work should be complete within 20 minutes after mixing.
Volume Ratio: A: B 1: 1
Full treatment time: 12 hours (25 C)
Net Capacity: 65g/100g
1 x Magic Welding Glue A
1 x Magic Welding Glue B
NOT SOLD IN STORES!
ADD TO CART NOW for 50% OFF
SHIPPING DELAY NOTICE: Please expect 2-4 weeks shipping delay due to the High Volume of Orders.
It has been about a month now since I fixed a broken ceramics and it is still holding strong, so i have to recommend this product. Definitely works!
I have a bracelet and ring I love stainless steel and the lid to the end of the bracelet broke and this glue worked like a miracle great product easy to use
I needed a strong quick-setting glue to remount my rearview mirror that had fallen off my windshield - i used this product in utah winter conditions with just the car heater on and it set pretty quickly
A fast and reliable way to repair broken metal parts without the need of any professionals!
Works on metal pipes and mufflers really easy! A very thrifty metal repair solution!
Way better than expensive welding repairs! Works even on small metal items!
This product was perfect for my application. Was able to repair tons of metal frames easily!
Got my order in 19 days despite of the pandemic. This glue works like magic and can't wait to use it to my other projects.
Súper fácil de usar y funciona perfectamente. Altamente recomendado
This is great stuff. I repaired a damaged weld on an aluminum trailer. I then tried to pop the new repair. Couldn't do it. The entire repair held tight. Highly recommended!
Filled the hole for my OMP on my 12A RX7s front cover. Great product and easy to use.
I have been using this for 4 years for various repairs. Great for temporary drain plumbing repairs. Recently I restored my metal door bell.
I had a hole in my steam boiler that I tried to patch a few months ago with hydraulic cement. The cement patch failed within days. I bought 2 tubes of these and a month later it's still holding strong. I highly recommend this product.
Used it to fill in rusted out gap on an oxygen sensor bung that was leaking air into the 02 sensor and causing false reading. So far so good I drove it 3 days no check engine light and the exhaust putty is holding up so far.
Received product today. Will update this after product has setup and been tested. It is easy to apply after you thoroughly clean and prep the surface. I have replaced this manifold 3 times and an tired of changing it. I wanted to try this method and see how long it lasts. I will let it cure at least 24 hours before starting my 06 Expedition. Once you mix the product you must use it all or throw it away.
After 24+ hours the filler had hardened and I sanded it down flat. Tested overnight with water, no leaks. Cleaned skillet thoroughly and went through two seasoning cycles @ 500 degrees for 1 hour plus cool down time. I have used the skillet a few times since and the repair has held up.
This stuff works. Kept me from having to buy a new exhaust manifold.
I used this to seal up the exhaust on my riding mower where the header pipe goes into the muffler.
I used this on a couple small holes in a 4 wheeler muffler. I have run it at full throttle with a very hot exhaust. All is holding tight.
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device